Home
Arico Technology Co., Ltd. Arico Technology Co., Ltd.
Company Products Worldwide News Contact Us Site Map
Company Profile
Products
Hot Runner Temperature Controllers
Temperature Controllers
Plastic/Rubber Machine Controllers
Solid State Relay
Ceramic Band Heaters
GEFRAN Displacement Transducers
GEFRAN Melt Pressure Transducers
GEFRAN Contactless Displacement Transducers
GEFRAN Pressure Transducers
GEFRAN Instruments
GEFRAN Load Cells
Others Products
Worldwide
News

GEFRAN Melt Pressure Transducers - M31

Home > Products > GEFRAN Melt Pressure Transducers > M31
Pressure Transducer - M31
Product Name : M31 Melt pressure transmitters
M31 Features:
  1. Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
  2. Accuracy: <±0.25% FSO (H); <±0.5% FSO (M)
  3. Fluid-filled system for temperature stability
  4. Mercury filling volume: M30 (30mm3), M31-M32-M33 (40mm3)
  5. 1/2-20UNF, M18x1.5 standard threads; other types available on request
  6. Standard diaphragm is 15-5 PH stainless steel with GTP coating
  7. 17-7 PH corrugated diaphragm with GTP coating for ranges below 100bar-1500psi
Specifications:
  1. Accuracy up to ±0.25%FSO
  2. Resolution: Infinite
  3. Measurement range = 0..35 to 0..2000bar / 0..500 to 0..30000psi
  4. Maximum overpressure = 2 x FS (1.5 x FS above1000bar)
  5. Supply voltage = 6..12Vdc (10Vdc typical)
  6. Strain gage bridge resistance = 350 Ohm (550 below 100bar)
  7. Isolation resistance (at 50Vdc) = >1000 MOhm
  8. Zero balance = ±0.5% FSO
  9. Calibration signal = 80% FSO
  10. Compensated temperature range = 0...+100°C / 32...212°F
  11. Maximum temperature range = -30...+120°C / -22...250°F
  12. Thermal drift in compensated range < 0.02% FSO/°C
  13. Diaphragm maximum temperature < 400°C / 750°F
  14. Zero drift due to change in process temperature = 0.02 bar/°C
  15. Thermocouple (model M32) STD : type "J"
  16. Protection degree (with 6-pin mating connector): IP65
Relative Product :
TOP
Company | Products | Worldwide | News | Contact Us | Site Map | Home     
 Copyright © Arico Technology Co., Ltd.　All Rights Reserved. Machine Tools Directory, Plastics and Rubber Directory